Features of Allergic Harvest PC

The whole set for the construction of a 4-meter greenhouse 3 sheets of cellular polycarbonate in the shape of rolls of 2.1 m length and a diameter of 60-90 cm. The thickness of this substance is 4 mm.

If you would like, you can raise the distance of the construction to 6 metres or more. To try it, it’s enough to attach a two-meter expansion. When selecting a drawing, look closely at the space between the arches. This figure must be 65 cm, that’s the most appropriate duration for the specified depth of the substance. The width of the doorways according to the manufacturer’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, it is necessary to select a place because of its place. If that is done correctly, you can provide yourself with a crop of fresh vegetables for the entire year.

The place for your upcoming greenhouse is marked instantly at the preparation of this garden plot. In order to melt the snow in the location of their greenhouse as soon as possible, the ideal point on the website will be a slight elevation. In addition, in such a location won’t have to be concerned about substantial humidity as dirt and air in the construction.

Assemble a polycarbonate greenhouse in an elevated site – intends to care for the optimal temperatures indoors.

If it is not possible to put a greenhouse on an elevated position, you’ll have to pour a layer of fine shattered rock about 20 cm and the exact same layer of fertile soil to make seedbeds.

Before building a greenhouse on your garden plot, it’s also wise to think about where and how this structure will be installed. To begin with, you have to select a place for it. The greenhouse should be located in a well-lit area at least a few meters away from homes, barns and other structures.

The best way to Put in a greenhouse Based on the sides of the Planet

Make sure you level the dirt surface – it’s ideal to even remove the surface. This will also eliminate weed seeds. And for ease of work, remove the dirt in an area that’s going to a meter wider on all sides of the rectangle that you want.

Additionally, it is worth considering using a base. As manufacturers say, today most greenhouses don’t need that, particularly if they (greenhouses) are employed only in the spring and summer period. However, experienced gardeners still suggest making at least an elementary basis from a bar. It is quite simple – it is enough to connect with each other using metal corners and screws four pieces of timber with a cross-section of at least 10 * 10 cm. The size of such a foundation ought to be equal to the foundation of the upcoming greenhouse.

Simple bar base

You may even make a strip base of concrete. He’s more dependable than a pub base, but requires more financial and labour expenses. Incidentally, the rainwater, that will be utilised in the winter, without it and do not do with it at all.

Stages of the formation of a strip foundation: a schematic representation

Many manufacturers advise to set up greenhouse structures without even building a base. For this use, they equip the framework with special T-shaped legs, so the construction was securely fixed. But, as practice shows, it is still required to construct a foundation: so and the foundation will be more firmly fixed and the elements of the basis in touch with the ground, will be kept much more in its initial state.

The main issue is to take care of the material with special agents to protect the wood from moisture. The substance is generally installed on concrete cubes that are dug into the ground. To get a six-meter structure, they want 10 pieces: four on each side and one in the center of the ends.

Before you do the greenhouse itself, you have to choose the right place for it. It has to be an even site, so that the frame was found equally, without distortions. It should be bright and not obscured by buildings or trees.

Hammad Administrator
Sorry! The Author has not filled his profile.
Hammad Administrator
Sorry! The Author has not filled his profile.
Latest Posts

Comment here